Analog Input Module Flex I/O, 8-ch., 24VDC, TS35?panel mount, Allen-Bradley

Flex™ I/O Analog Input Module, Type: Series B, Number Of Channels: 8 (Single-Ended, Non-Isolated), Voltage Rating: 19.2 - 31.2 VDC, Functional Data Range: More Than 17 V At 22 MA, More Than 23 V At 0 MA, Isolation: 50 V (Continuous), Basic Insulation Type, Routine Tested At 850 VDC For 1 SEC, Between Field Side And System, No Isolation Between Individual Channels, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2500 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2500 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 10 KHZ - 80 MHZ, Mounting: DIN Rail, Panel, Length: 3.7 IN, Width: 2.95 IN, Height: 1.8 IN, Temperature Rating: -4 To 131 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration Operating: 2 G At 10 - 500 HZ, Shock - Operating: 15 G, Non-Operating: 15 G, Accuracy: Absolute Accuracy: 0.1% Full Scale At 20 DEG C, Accuracy Drift With Temperature: 0.05% Full Scale For 0 - 55 DEG C, Power Dissipation: 3.9 W At 31.2 VDC, Surge Transient Immunity: Plus/Minus 1 KV Line-Line(DM) And Plus/Minus 2 KV Line-Earth (CM) On Power Ports, Plus/Minus 2 KV Line-Earth (CM) On Shielded Ports, Resolution: 16 Bits, Indicator: 8 Red Fault Indicator, 8 Yellow Channel Indicator, 1 Green Power, Bus Rating: Flexbus Current External Input: 5 VDC 80 MA, 24 VDC 190 MA, Keyswitch Position: 3, Input Step Response: Step Response To 99% - Current Terminal: 80 MS, Standard/Approvals: C/US UL listed, CE-ATEX, CE-EMC, C-tick, GOST_R, KCC certified, marine-BVS, ROSTECHNADZOR, RUS_PAT_APPR, Application: For in-cabinets

• Item Name: Analog Input Module

• Type: Series B

• Sub Brand: Flex™ I/O

• Number Of Channels: 8 (Single-Ended, Non-Isolated)

• Voltage Rating: 19.2 - 31.2 VDC, Functional Data Range: More Than 17 V At 22 MA, More Than 23 V At 0 MA

• Isolation: 50 V (Continuous), Basic Insulation Type, Routine Tested At 850 VDC For 1 SEC, Between Field Side And System, No Isolation Between Individual Channels

• Enclosure: Open Type

• Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2500 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2500 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 10 KHZ - 80 MHZ

• Mounting: DIN Rail, Panel

• Length: 3.7 IN

• Width: 2.95 IN

• Height: 1.8 IN

• Temperature Rating: -4 To 131 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration Operating: 2 G At 10 - 500 HZ, Shock - Operating: 15 G, Non-Operating: 15 G

• Accuracy: Absolute Accuracy: 0.1% Full Scale At 20 DEG C, Accuracy Drift With Temperature: 0.05% Full Scale For 0 - 55 DEG C

• Power Dissipation: 3.9 W At 31.2 VDC

• Indicator: 8 Red Fault Indicator, 8 Yellow Channel Indicator, 1 Green Power

• Surge Transient Immunity: Plus/Minus 1 KV Line-Line(DM) And Plus/Minus 2 KV Line-Earth (CM) On Power Ports, Plus/Minus 2 KV Line-Earth (CM) On Shielded Ports

• Resolution: 16 Bits

• Keyswitch Position: 3

• Bus Rating: Flexbus Current External Input: 5 VDC 80 MA, 24 VDC 190 MA

• Input Step Response: Step Response To 99% - Current Terminal: 80 MS

FLEX I/O offers all the functions of larger rack-based I/O without the space requirements. Its cost effectiveness, flexibility, modularity, and reliability. FLEX I/O helps eliminate multiple long wiring runs, reduces terminations per point, decreases engineering and installation costs and time, and substantially reduces downtime. It complements all processor platforms. Can communicate on EtherNet/IP, ControlNet, DeviceNet, and PROFIBUS DP. Independently select the I/O, termination style, and network to meet your application needs. Conformally coated, extreme environment FLEX I/O products help to reduce panel costs and the need for additional heating/cooling equipment, resulting in lower installation and maintenance costs.

• Reduced space - wire direct from sensor to terminal base and eliminate terminal strip
• Functionality: 4- through 32-point modules offer functions of larger rack-based I/O
• Increased productivity: easy configuration and setup of I/O modules using wizards speeds engineering and installation
• Reduced downtime: removal and insertion under power (RIUP) and diagnostics
• Operation in harsh environments: conformal coated and extreme environment rated modules
• Network flexibility: communicates on EtherNet/IP, ControlNet, DeviceNet, and PROFIBUS DP
• Improved plant operations: HART analog modules pass through HART data to asset management software or controller for improved plant operations
• Standards: C/US UL listed, CE-ATEX, CE-EMC, C-tick, GOST_R, KCC certified, marine-BVS, ROSTECHNADZOR, RUS_PAT_APPR
• Applications: For in-cabinets