Analog Current/Voltage Input Module Spectrum Controls, 4-ch., w/HART, Rockwell Automation

Analog And Hart Input Module, Number Of Channels: 4, Input: Overvoltage Protection: 24 VDC Voltage, 7 VDC Current, Voltage Rating: 0 - 5/1 - 5/0 - 10 V, Plus/Minus 10 V, Current Rating: 0 - 20 MA, 4 - 20 MA, Backplane: 160 MA At 5 V, 125 MA At 24 V, Isolation: 500 Channel-To-Channel, 500 VDC Field-Wiring-To-Backplane, 500 VDC Field-Wiring-To-Chassis-Ground, Mounting: Chassis, Temperature Rating: 32 - 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Response Time: Update Times: 18 - 488 MS All Channels, 6 SEC For HART, Accuracy: Plus/Minus 0.2 % Of Range Voltage, Plus/Minus 0.35 % Of Range Current, Power Dissipation: 4.01 W, Rejection Ratio: Common Mode: 60 DB At 60 HZ, Normal Mode: 50 DB At 50/60 HZ, Slot Width: 1, Resolution: 16 Bits, Keyswitch Position: 18, Impedance: Greater Than 220 KOHM Voltage, Greater Than 250 OHM Current, Standard/Approvals: C/US UL listed, class I, division 2, groups A, B, C, D, CE marked, Application: For allen-bradley compactlogix™ plcs

• Item Name: Analog And Hart Input Module

• Number Of Channels: 4

• Input: Overvoltage Protection: 24 VDC Voltage, 7 VDC Current

• Voltage Rating: 0 - 5/1 - 5/0 - 10 V, Plus/Minus 10 V

• Current Rating: 0 - 20 MA, 4 - 20 MA, Backplane: 160 MA At 5 V, 125 MA At 24 V

• Isolation: 500 Channel-To-Channel, 500 VDC Field-Wiring-To-Backplane, 500 VDC Field-Wiring-To-Chassis-Ground

• Mounting: Chassis

• Temperature Rating: 32 - 140 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing)

• Response Time: Update Times: 18 - 488 MS All Channels, 6 SEC For HART

• Accuracy: Plus/Minus 0.2 % Of Range Voltage, Plus/Minus 0.35 % Of Range Current

• Power Dissipation: 4.01 W

• Resolution: 16 Bits

• Impedance: Greater Than 220 KOHM Voltage, Greater Than 250 OHM Current

• Keyswitch Position: 18

• Rejection Ratio: Common Mode: 60 DB At 60 HZ, Normal Mode: 50 DB At 50/60 HZ

• Slot Width: 1

The 1769sc-IF4IH Analog Input Modules provide CompactLogix PLCs with full analog capability and the benefit of HART (highway addressable remote transducer) protocol in an I/O module. These modules offer four channels of analog input - each easily configured for voltage or current signals. The 1769sc-IF4IH also act as a HART master, allowing communication with HART field devices. HART data is available directly on the network.

• HART dynamic variables - primary with engineering units, secondary with engineering units, tertiary with engineering units, fourth with engineering units
• 5 filter frequencies
• Factory calibration, open circuit
• Standards: C/US UL listed, class I, division 2, groups A, B, C, D, CE marked
• Applications: For allen-bradley compactlogix™ plcs