Digital Contact Output Module CompactLogix, 8-ch., 125mA 5.1VDC drawn, Allen-Bradley

CompactLogix™ Digital Contact Output Module, Number Of Channels: 8 (4 Points/Group), Output: Operating Voltage: 5 - 265 VAC, 5 - 125 VDC, On-State Current: 10 MA At 5 VDC (Minimum), Current Rating: Drawn: 125 MA At 5.1 V, Drawn: 100 MA At 24 V, Current Per Point: 2.5 A (Maximum), Current Per Module: 16 A (Maximum), Isolation: 1836 VAC For 1 SEC Or 2596 VDC For 1 SEC, Output Point To Bus And Group To Group, 265 VAC Working Voltage, Enclosure: Open Type, Display: Status LED, Connection Cables: 22 - 14 AWG Solid, 22 - 16 AWG Stranded, Mounting: DIN Rail, Panel, Length: 1.38 IN, Width: 3.43 IN, Height: 4.65 IN, Temperature Rating: 32 - 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 5 G At 10 - 500 HZ (Operating), 2 G (Relay Operating), Shock - Panel Mount: 30 G (Operating), 7.5 G (Relay Operating), 40 G (Non-Operating), DIN Rail Mount: 20 G (Operating), 5 G (Relay Operating), 30 G (Non-Operating), Response Time: Delay (On): 10 MS, Delay (Off): 10 MS, Power Dissipation: 2.83 W, Slot Width: 1, Standard/Approvals: C/US UL listed, UL 508 listed, CSA C22.2, file number 142, C-TICK certified, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, MARINE-LR certified, ROSTECHNADZOR

• Item Name: Digital Contact Output Module

• Sub Brand: CompactLogix™

• Number Of Channels: 8 (4 Points/Group)

• Output: Operating Voltage: 5 - 265 VAC, 5 - 125 VDC, On-State Current: 10 MA At 5 VDC (Minimum)

• Current Rating: Drawn: 125 MA At 5.1 V, Drawn: 100 MA At 24 V, Current Per Point: 2.5 A (Maximum), Current Per Module: 16 A (Maximum)

• Isolation: 1836 VAC For 1 SEC Or 2596 VDC For 1 SEC, Output Point To Bus And Group To Group, 265 VAC Working Voltage

• Enclosure: Open Type

• Display: Status LED

• Connection Cables: 22 - 14 AWG Solid, 22 - 16 AWG Stranded

• Mounting: DIN Rail, Panel

• Length: 1.38 IN

• Width: 3.43 IN

• Height: 4.65 IN

• Temperature Rating: 32 - 140 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 5 G At 10 - 500 HZ (Operating), 2 G (Relay Operating), Shock - Panel Mount: 30 G (Operating), 7.5 G (Relay Operating), 40 G (Non-Operating), DIN Rail Mount: 20 G (Operating), 5 G (Relay Operating), 30 G (Non-Operating)

• Response Time: Delay (On): 10 MS, Delay (Off): 10 MS

• Power Dissipation: 2.83 W

• Slot Width: 1

Most output modules have built-in surge suppression to reduce the effects of high-voltage transients. Use an additional suppression device if an output is being used to control inductive devices, such as relays, motor starters, solenoids, or motors. Additional suppression is especially important if your inductive device is in series with or parallel to hard contacts, such as push buttons or selector switches. Add a suppression device directly across the coil of an inductive device to reduce the effects of voltage transients caused by interrupting the current to that device and to prolong the life of the switch contacts.

• Logic circuits determine the output status
• An output LED indicates the status of the output signal
• Optical isolation separates module logic and bus circuits from field power
• The output driver turns the corresponding output on or off
• Standards: C/US UL listed, UL 508 listed, CSA C22.2, file number 142, C-TICK certified, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, MARINE-LR certified, ROSTECHNADZOR