Digital Output Module MicroLogix, 8-ch., 24VDC, Allen-Bradley

MicroLogix™ Digital Output Module, Type: Discrete, Number Of Channels: 8 (Isolated), Output: Off-State Leakage: 1 MA, On-State Current: 1 MA, On-State Voltage Drop: 1 VDC, Continuous Current Per Point: 0.5 A At 55 DEG C, 1 A At 30 DEG C, Continuous Current Per Module: 4 A At 55 DEG C, 8 A At 30 DEG C, Voltage Rating: 20.4 - 26.4 VDC, Isolation: Verified By One Of The Following Dielectric Tests: 1200 VAC For 1 SEC Or 1697 VDC For 1 SEC, 75 VDC Working Voltage (IEC Class 2 Reinforced Insulation), Enclosure: IP20, Rfi Suppression: Radiated: 10 V/M, 80 - 1000 MHZ, 80% Amplitude Modulation, 900 MHZ Keyed Carrier, Conducted: 10 V, 0.15 - 80 MHZ, Mounting: DIN Rail, Panel, Length: 1.59 IN, Width: 3.425 IN, Height: 3.543 IN, Temperature Rating: 32 - 131 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration - Operating: 10 - 500 HZ, 5 G, 0.015 IN Peak-To-Peak, Relay Operation: 2 G, Shock - Operating: 30 G Panel Mounted, 20 G DIN-Rail Mounted, Relay Operation: 7.5 G Panel Mounted, 5 G DIN Rail Mounted, NonOperating: 40 G Panel Mounted, 30 G DIN Rail Mounted, Response Time: Signal Delay - On Delay: 0.1 MS, Off Delay: 1 MS, Power Dissipation: Heat Dissipation: 1.61 W, Output Type: Current Sourcing, Surge Current: 2 A (Repeatability Is Once Every 2 SEC For A Duration Of 10 MS), Surge Transient Immunity: 2 KV Common Mode, 1 KV Differential Mode, Bus Rating: Bus Current Draw: 115 MA At 5 VDC (0.575 W), Indicator: LED, Standard/Approvals: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, marine-ABS, marine-BVS, marine-DNV, marine-GL, marine-KRS, marine-LR, ROSTECHNADZOR

• Item Name: Digital Output Module

• Type: Discrete

• Sub Brand: MicroLogix™

• Number Of Channels: 8 (Isolated)

• Output: Off-State Leakage: 1 MA, On-State Current: 1 MA, On-State Voltage Drop: 1 VDC, Continuous Current Per Point: 0.5 A At 55 DEG C, 1 A At 30 DEG C, Continuous Current Per Module: 4 A At 55 DEG C, 8 A At 30 DEG C

• Voltage Rating: 20.4 - 26.4 VDC

• Isolation: Verified By One Of The Following Dielectric Tests: 1200 VAC For 1 SEC Or 1697 VDC For 1 SEC, 75 VDC Working Voltage (IEC Class 2 Reinforced Insulation)

• Enclosure: IP20

• Rfi Suppression: Radiated: 10 V/M, 80 - 1000 MHZ, 80% Amplitude Modulation, 900 MHZ Keyed Carrier, Conducted: 10 V, 0.15 - 80 MHZ

• Mounting: DIN Rail, Panel

• Length: 1.59 IN

• Width: 3.425 IN

• Height: 3.543 IN

• Temperature Rating: 32 - 131 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration - Operating: 10 - 500 HZ, 5 G, 0.015 IN Peak-To-Peak, Relay Operation: 2 G, Shock - Operating: 30 G Panel Mounted, 20 G DIN-Rail Mounted, Relay Operation: 7.5 G Panel Mounted, 5 G DIN Rail Mounted, NonOperating: 40 G Panel Mounted, 30 G DIN Rail Mounted

• Response Time: Signal Delay - On Delay: 0.1 MS, Off Delay: 1 MS

• Power Dissipation: Heat Dissipation: 1.61 W

• Output Type: Current Sourcing

• Indicator: LED

• Surge Transient Immunity: 2 KV Common Mode, 1 KV Differential Mode

• Surge Current: 2 A (Repeatability Is Once Every 2 SEC For A Duration Of 10 MS)

• Bus Rating: Bus Current Draw: 115 MA At 5 VDC (0.575 W)

The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. Use digital I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.

• Integrated high-performance I/O bus
• Software keying to prevent incorrect positioning within the system
• Finger-safe terminal blocks for I/O wiring
• Label to record I/O terminal designations
• Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
• Standards: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, marine-ABS, marine-BVS, marine-DNV, marine-GL, marine-KRS, marine-LR, ROSTECHNADZOR