Digital AC Input Module ControlLogix, 16-ch., 120VAC, drawn 2mA 24V, Allen-Bradley

ControlLogix® Digital AC Input Module, Number Of Channels: 16, Input: Nominal: 120 VAC, Operating: 74 - 132 VAC, Off-State Voltage: 20 V, On-State Current: 5 - 13 MA, Off-State Current: 2.5 MA, Current Rating: Drawn: 2 MA At 24 V, Inrush: 250 MA, Isolation: 125 V Continuous Between Groups of 8 Inputs, Enclosure: Open Type, Display: Input, Communication Status And Module Health, Mounting: Chassis, Temperature Rating: 0 - 60 DEG C, Environmental Conditions: Relative Humidity: 5 - 95%Noncondensing, Vibration: 2 G, Shock: 30 G, Response Time: Delay (Off To On): 10 MS + Filter Time, Delay (ON To OFF): 8 MS + Filter Time, Cyclic Update: 200 MIC-SEC - 750 MS, Power Dissipation: 5.8 W At 60 DEG C, Keyswitch Position: 1, Slot Width: 1, Impedance: Input: 10.15 KOHM At 132 VAC, Standard/Approvals: CE-EMC marked, CE-LVD marked, CSA certified, CSA_HAZ certified, C-TICK certified, FM-US_HAZ approved, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, MARINE-LR certified, ROSTECHNADZOR, UL-US listed, FM approved, KC certified

• Item Name: Digital AC Input Module

• Sub Brand: ControlLogix®

• Number Of Channels: 16

• Input: Nominal: 120 VAC, Operating: 74 - 132 VAC, Off-State Voltage: 20 V, On-State Current: 5 - 13 MA, Off-State Current: 2.5 MA

• Current Rating: Drawn: 2 MA At 24 V, Inrush: 250 MA

• Isolation: 125 V Continuous Between Groups of 8 Inputs

• Enclosure: Open Type

• Display: Input, Communication Status And Module Health

• Mounting: Chassis

• Temperature Rating: 0 - 60 DEG C

• Environmental Conditions: Relative Humidity: 5 - 95%Noncondensing, Vibration: 2 G, Shock: 30 G

• Response Time: Delay (Off To On): 10 MS + Filter Time, Delay (ON To OFF): 8 MS + Filter Time, Cyclic Update: 200 MIC-SEC - 750 MS

• Power Dissipation: 5.8 W At 60 DEG C

• Impedance: Input: 10.15 KOHM At 132 VAC

• Keyswitch Position: 1

• Slot Width: 1

Bulletin 1756 ControlLogix® I/O modules provide a full range of digital, diagnostic digital, analog, motion control, and specialty I/O to meet your application needs. You can use any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.

• Requires either a removable terminal block (RTB) or a Bulletin 1492 wiring interface module (IFM) to connect all field-side wiring
• Inherent time-stamping capabilities for sequence of events (SOE) applications
• Comprehensive I/O diagnostics for detection of both system and field-side failures
• Removal and insertion under power (RIUP) for ease of maintenance
• Electronic keying to help prevent replacement errors
• I/O wizards in the Studio 5000™ Logix Designer application enable quick and easy module configuration
• Standards: CE-EMC marked, CE-LVD marked, CSA certified, CSA_HAZ certified, C-TICK certified, FM-US_HAZ approved, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, MARINE-LR certified, ROSTECHNADZOR, UL-US listed, FM approved, KC certified